M29504/04 and M29504/05, ARINC 801 Insertion Tool (metal) (0721-1120)
includes insertion tool
M28876 Termination Tools
Showing 1–12 of 16 resultsSorted by popularity
-
-
Trinity Kit (0701-3910)
This kit contains the following: 0701-3820 Straight Insertion Tool 0701-3850 Extraction Tool 0701- 3901 ASIRT (Alignment Sleeve Insertion/Extraction Tool)
-
ASIRT (Alignment Sleeve Insertion and Removal Tool) (0701-3901) (NSN: 5120-01-419-2942)
This precision tool will allow the careful removal or installation of M29504/15 alignment sleeves from M28876 multichannel connector nests. The extraction mechanism will remove the alignment sleeve, yet leaves the termini and fiber undamaged. NAVSEA listed and approved for MIL-STD-2042C applications.
-
Terminus Removal Tool (0701-3850) (NSN: 5998-01-147-0198)
Use the 0701-3850 for extraction of M29504/14 and M29504/15 termini from the nest without dam- aging the termini and endface. This tool is also used to remove the ceramic termini from the 0701- 4100 polishing fixture. NAVSEA listed and approved for MIL-STD-2042C applications.
-
Straight Insertion Tool (0701-3820) (NSN: 5120-01-144-5338)
Use the 0701-3820 for installation of M29504/14 and M29504/15 termini into straight, 45°, and 90° backshell connectors. NAVSEA listed and approved for MIL-STD-2042C applications.
-
90° Insertion Tool (0701-3810) (NSN: 5120-01-145-5172)
Use the 0701-3810 for installation of M29504/14 and M29504/15 termini into straight, 45°, and 90° backshell connectors. NAVSEA listed and approved for MIL-STD-2042C applications.
-
Micro Torque Tool (0701-3055)
Use the 0701-3055 tool for the installation of the Aptiv split backshell onto an M28876 connector. This tool is set to 4 inch pounds to ensure proper torque
-
Backshell Spanner Wrench (31-Channel) (0701-3525)
Use this C-type backshell spanner wrench to torque the backshell and secure the 4, 8, and 31-channel connectors. A properly torqued backshell will ensure lower dB loss in multichannel connectors. NAVSEA listed and approved for MIL-STD-2042C applications.
-
Backshell Spanner Wrench (4-Channel/8-Channel (0701-3520) (1239109H) (NSN: 5120-01-419-3283)
Use this C-type backshell spanner wrench to torque the backshell and secure the 4, 8, and 31-channel connectors. A properly torqued backshell will ensure lower dB loss in multichannel connectors. NAVSEA listed and approved for MIL-STD-2042C applications.
-
Strap Wrench (0701-3060) (NSN: 5120-01-037-1395)
The 0701-3060 strap wrench is used to torque the M28876 backshell to the proper level as outlined in the MIL- STD-2042C. Used in conjunction with the 0701-3050 torque wrench and/or the 0701-3520 spanner wrench. Note: Two 0701-3060 strap wrenches are required for backshell size 23 applications. NAVSEA listed and approved for MIL-STD-2042C applications.
-
-
O-Ring Installation Tool, size 23 (31-channel) (0701-3590) (NSN: 5120-01-424-7866)
Install O-Rings without breaking by using the O-Ring installation tools. Select the appropriate tool to secure the correct sized O-Ring. NAVSEA listed and approved for MIL-STD-2042C applications.