Navy Approved COTS SC and LC Connectors

Showing all 8 results

  • Singlemode LC (Pull Proof), 2.00mm boot (0204-6335)

    • Pull Proof SC and LC connectors are designed for loose structured cables that do not allow the ferrule to move (create an optical disconnect) if the cable/fiber is pulled. This is accomplished by crimping the crimp sleeve to the connector housing and cable. The SC and LC connectors are usually found at electronic ports.
    • COTS (Commercial Off-the-Shelf) SC and LC Specifications

    (02046335)

     

  • Multimode LC (Pull Proof), 2.00mm boot (0204-6330)

    • Pull Proof SC and LC connectors are designed for loose structured cables that do not allow the ferrule to move (create an optical disconnect) if the cable/fiber is pulled. This is accomplished by crimping the crimp sleeve to the connector housing and cable. The SC and LC connectors are usually found at electronic ports.
    • COTS (Commercial Off-the-Shelf) SC and LC Specifications

    (02046330)

  • Singlemode Duplex LC Gen II (Non-Pull Proof) 2.00mm boot (0204-6343)

    • Non-Pull Proof SC and LC connectors are designed for tight structured cable (mil-spec fiber) to allow the ferrule to move with the cable under spring tension. The crimp sleeve is crimped to the barrel of the connector that is attached to the ferrule within a spring (similar to the ST connector de- sign). The SC and LC connectors are usually found at the passive connection points in the cable plant.
    • COTS (Commercial Off-the-Shelf) SC and LC Specifications

    (02046343)

  • Multimode Duplex LC Gen II (Non-Pull Proof) 2.00mm Boot (0204-6348)

    • Non-Pull Proof SC and LC connectors are designed for tight structured cable (mil-spec fiber) to allow the ferrule to move with the cable under spring tension. The crimp sleeve is crimped to the barrel of the connector that is attached to the ferrule within a spring (similar to the ST connector de- sign). The SC and LC connectors are usually found at the passive connection points in the cable plant.
    • COTS (Commercial Off-the-Shelf) SC and LC Specifications

    (02046348)

  • Singlemode LC Gen II (Non-Pull Proof), 2.00mm boot (0204-6341)

    • Non-Pull Proof SC and LC connectors are designed for tight structured cable (mil-spec fiber) to allow the ferrule to move with the cable under spring tension. The crimp sleeve is crimped to the barrel of the connector that is attached to the ferrule within a spring (similar to the ST connector de- sign). The SC and LC connectors are usually found at the passive connection points in the cable plant.
    • COTS (Commercial Off-the-Shelf) SC and LC Specifications

    (02046341)

  • Singlemode SC (Non-Pull Proof), 2.00mm boot (0204-6355)

    • Non-Pull Proof SC and LC connectors are designed for tight structured cable (mil-spec fiber) to allow the ferrule to move with the cable under spring tension. The crimp sleeve is crimped to the barrel of the connector that is attached to the ferrule within a spring (similar to the ST connector de- sign). The SC and LC connectors are usually found at the passive connection points in the cable plant.
    • COTS (Commercial Off-the-Shelf) SC and LC Specifications

    (02046355)

  • Multimode SC (Non-Pull Proof), 2.00mm boot (0204-6350)

    • Non-Pull Proof SC and LC connectors are designed for tight structured cable (mil-spec fiber) to allow the ferrule to move with the cable under spring tension. The crimp sleeve is crimped to the barrel of the connector that is attached to the ferrule within a spring (similar to the ST connector de- sign). The SC and LC connectors are usually found at the passive connection points in the cable plant.
    • COTS (Commercial Off-the-Shelf) SC and LC Specifications
  • Multimode LC Gen II (Non-Pull Proof), 2.00mm boot (0200-2481)

    • Non-Pull Proof SC and LC connectors are designed for tight structured cable (mil-spec fiber) to allow the ferrule to move with the cable under spring tension. The crimp sleeve is crimped to the barrel of the connector that is attached to the ferrule within a spring (similar to the ST connector de- sign). The SC and LC connectors are usually found at the passive connection points in the cable plant.
    • COTS (Commercial Off-the-Shelf) SC and LC Specifications

    (02002481)